Category: Modem & Router Setup · Last updated 16 Nov 2026
Modem and router setup guides: find your device
Find the setup guide for your modem, router or mesh Wi-Fi system, and the settings our network needs.
If you ordered a modem from Lightning IP, it arrives pre-configured, so you only need to plug it in. If you're using your own modem or router, find it below for step-by-step setup instructions.
The settings our network needs
Whatever device you use, these are the only settings that matter:
| Setting | What to choose |
|---|---|
| Connection type | Dynamic IP (sometimes called IPoE, DHCP or Automatic) |
| VLAN / VLAN ID | Off (untagged) |
| Username and password | Not needed |
If your device is already set up for PPPoE from a previous provider, you can leave it that way. We accept PPPoE with any username and password. Just make sure the VLAN setting is turned off.
Modem routers (work on every nbn technology, including FTTN and FTTB)
These devices have a VDSL modem built in, so they work on FTTN and FTTB as well as FTTP, HFC, FTTC and Fixed Wireless. Each guide also explains your options if you want to add your own router.
- TP-Link VX230v (Aginet)
- TP-Link VX420-G2h small business modem with optional 4G backup
- TP-Link VB433v
- TP-Link Archer VR1600v, VR400 or VR300
- NetComm NF20MESH
- NetComm NF71
- NetComm NF18ACV, NF17ACV or NF10WV
- Telstra Smart Modem
- Optus Ultra WiFi Modem
Routers and mesh Wi-Fi (FTTP, HFC, FTTC and Fixed Wireless)
These devices don't have a modem built in. They plug straight into your nbn equipment on FTTP, HFC, FTTC and Fixed Wireless. On FTTN or FTTB, you'll need one of the modem routers above set to bridge mode, with your router plugged into it.
- TP-Link Aginet mesh (HX510, HX716 Pro or HB210 Pro)
- eero (all models)
- TP-Link Deco (all models, including the Deco X20-DSL)
- Google Nest Wifi Pro, Nest Wifi or Google Wifi
- TP-Link Archer routers
Not sure which kind of device you have?
Look at the back of your device. If it has a small phone-style port labelled DSL or VDSL, it's a modem router and will work on any nbn technology. If it only has ethernet ports, it's a router and needs to plug into your nbn equipment, or into a separate VDSL modem on FTTN or FTTB.
Device not listed?
Most nbn-compatible devices will work using the settings in the table above. If your device came from another provider, factory reset it first. Then look for the internet or WAN settings in your device's setup page or app, choose Dynamic IP and make sure VLAN is off. If you get stuck, get in touch and we'll help you set it up.
Related Articles
- Modem & Router SetupSetting up a Telstra Smart ModemHow to factory reset and connect a Telstra Smart Modem to your Lightning IP nbn service, and how to use bridge mode.
- Modem & Router SetupSetting up an Optus Ultra WiFi ModemHow to factory reset and connect an Optus Ultra WiFi Modem to your Lightning IP nbn service.
- Modem & Router SetupSetting up an older NetComm modem (NF18ACV, NF17ACV or NF10WV)How to set up an older NetComm NF18ACV, NF17ACV or NF10WV on FTTN/FTTB or Ethernet WAN nbn, and how to put it in bridge mode.
- Modem & Router SetupSetting up your D-Link DSL-2888AHow to set up a D-Link DSL-2888A modem on an FTTN or FTTB nbn connection with Lightning IP.
Was this article helpful?
Your feedback helps us improve our support content.