Category: Modem & Router Setup · Last updated 16 Nov 2026
Setting up your eero
How to set up an eero mesh router (eero 7, Pro 7, Max 7, 6+ and others) on your nbn connection.
eero mesh routers, including the eero 7, eero Pro 7, eero Max 7, eero 6 and eero 6+, are all set up the same way through the eero app. If you bought your eero from Lightning IP, just follow the app and it will connect automatically.
eero is a router, not a modem, so it doesn't have a VDSL modem built in. On FTTP, HFC, FTTC and Fixed Wireless it plugs straight into your nbn equipment. On FTTN or FTTB you'll also need a VDSL modem set to bridge mode, with the eero plugged into it. See our modem and router setup guides for how to set up bridge mode on your modem.
Before you start
| Setting | What to choose |
|---|---|
| Connection type | Automatic (DHCP). This is eero's default |
| VLAN | Off |
| Username and password | Not needed |
You'll also need the eero app on your phone (App Store or Google Play) and an Amazon or eero account.
Setting up your eero
- Connect your gateway eero Choose one eero to be your gateway. Run an ethernet cable from one of its ethernet ports to your nbn equipment: port UNI-D1 on an FTTP or Fixed Wireless Connection Box, the ethernet port on an HFC Connection Box, or the port labelled Gateway on an FTTC Connection Device. On FTTN or FTTB, plug it into a LAN port on your bridged VDSL modem instead.
- Power it on Plug the eero into power and wait for the light to flash blue.
- Open the eero app Sign in or create an account, then tap Set up eero (or Add or replace devices if you already have an eero network).
- Follow the prompts The app finds your eero and checks the internet connection. Our network works with eero's automatic settings, so there's nothing to enter.
- Name your network Choose a Wi-Fi name and password.
- Add more eeros If you have a multi-pack, the app will guide you through placing and adding each extra eero. Place them roughly halfway between the gateway and the area that needs coverage.
If your eero was set up by another provider
If your eero was previously set up for PPPoE or a VLAN by another provider, it may not connect until you change it back.
- Open the settings In the eero app, tap Settings > Network settings > ISP settings.
- Turn off VLAN If a VLAN is set, turn it off.
- Check the connection type Make sure the connection type is automatic (DHCP). PPPoE also works on our network with any username and password, so you can leave it if it's already set up.
- Save and wait Save your changes and give the eero a couple of minutes to reconnect.
Phone service with eero
Some providers supply an eero ATA adapter so a home phone can plug into the eero. If you use a Lightning IP phone service, get in touch and we'll let you know what's needed.
If it doesn't connect
- Light stays red or the app can't find the internet - Check the cable is plugged into the correct port on your nbn equipment, and power-cycle the nbn equipment and the eero.
- On FTTN or FTTB - Make sure your VDSL modem is in bridge mode and its DSL light is solid.
- Still no luck - Follow our no internet connection troubleshooting guide, or get in touch.
Related Articles
- Modem & Router SetupModem and router setup guides: find your deviceFind the setup guide for your modem, router or mesh Wi-Fi system, and the settings our network needs.
- Modem & Router SetupSetting up a Telstra Smart ModemHow to factory reset and connect a Telstra Smart Modem to your Lightning IP nbn service, and how to use bridge mode.
- Modem & Router SetupSetting up an Optus Ultra WiFi ModemHow to factory reset and connect an Optus Ultra WiFi Modem to your Lightning IP nbn service.
- Modem & Router SetupSetting up an older NetComm modem (NF18ACV, NF17ACV or NF10WV)How to set up an older NetComm NF18ACV, NF17ACV or NF10WV on FTTN/FTTB or Ethernet WAN nbn, and how to put it in bridge mode.
Was this article helpful?
Your feedback helps us improve our support content.