---
title: "Setting up your eero"
description: "How to set up an eero mesh router (eero 7, Pro 7, Max 7, 6+ and others) on your nbn connection."
url: "https://www.lightningip.com.au/help/internet/setup-eero"
canonical: "https://www.lightningip.com.au/help/internet/setup-eero"
updated: "2026-11-16"
---

# Setting up your eero

How to set up an eero mesh router (eero 7, Pro 7, Max 7, 6+ and others) on your nbn connection.

eero mesh routers, including the eero 7, eero Pro 7, eero Max 7, eero 6 and eero 6+, are all set up the same way through the eero app. If you bought your eero from Lightning IP, just follow the app and it will connect automatically.

eero is a router, not a modem, so it doesn't have a VDSL modem built in. On **FTTP, HFC, FTTC and Fixed Wireless** it plugs straight into your nbn equipment. On **FTTN or FTTB** you'll also need a VDSL modem set to bridge mode, with the eero plugged into it. See our modem and router setup guides for how to set up bridge mode on your modem.

## Before you start

| Setting | What to choose |
|---|---|
| Connection type | Automatic (DHCP). This is eero's default |
| VLAN | Off |
| Username and password | Not needed |

You'll also need the **eero app** on your phone (App Store or Google Play) and an Amazon or eero account.

## Setting up your eero

1. **Connect your gateway eero** - Choose one eero to be your gateway. Run an ethernet cable from one of its ethernet ports to your nbn equipment: port **UNI-D1** on an FTTP or Fixed Wireless Connection Box, the ethernet port on an HFC Connection Box, or the port labelled **Gateway** on an FTTC Connection Device. On FTTN or FTTB, plug it into a LAN port on your bridged VDSL modem instead.
2. **Power it on** - Plug the eero into power and wait for the light to flash blue.
3. **Open the eero app** - Sign in or create an account, then tap **Set up eero** (or **Add or replace devices** if you already have an eero network).
4. **Follow the prompts** - The app finds your eero and checks the internet connection. Our network works with eero's automatic settings, so there's nothing to enter.
5. **Name your network** - Choose a Wi-Fi name and password.
6. **Add more eeros** - If you have a multi-pack, the app will guide you through placing and adding each extra eero. Place them roughly halfway between the gateway and the area that needs coverage.

## If your eero was set up by another provider

If your eero was previously set up for PPPoE or a VLAN by another provider, it may not connect until you change it back.

1. **Open the settings** - In the eero app, tap **Settings** > **Network settings** > **ISP settings**.
2. **Turn off VLAN** - If a VLAN is set, turn it off.
3. **Check the connection type** - Make sure the connection type is automatic (**DHCP**). PPPoE also works on our network with any username and password, so you can leave it if it's already set up.
4. **Save and wait** - Save your changes and give the eero a couple of minutes to reconnect.

## Phone service with eero

Some providers supply an eero ATA adapter so a home phone can plug into the eero. If you use a Lightning IP phone service, get in touch and we'll let you know what's needed.

## If it doesn't connect

- **Light stays red or the app can't find the internet** - Check the cable is plugged into the correct port on your nbn equipment, and power-cycle the nbn equipment and the eero.
- **On FTTN or FTTB** - Make sure your VDSL modem is in bridge mode and its DSL light is solid.
- **Still no luck** - Follow our no internet connection troubleshooting guide, or get in touch.
