Skip to main content

Category: Business nbn & Static IP · Last updated 19 Nov 2026

Setting up traffic shaping for Enterprise Fibre

How to shape traffic on your router or firewall to match your Enterprise Fibre bandwidth profile, with recommended rates and burst sizes.

To get the best performance from Enterprise Fibre, set your router or firewall to shape outgoing traffic to the speed you've purchased. This applies to any layer 2 or layer 3 device plugged directly into the network termination device (NTD or NTU).

The network termination device enforces your service's bandwidth profile. If your equipment sends traffic faster than that profile, the extra traffic is dropped, which causes retransmissions and slower real-world speeds. Matching it avoids this.

Key points

  • Shape, don't police - Egress shaping at both ends gives the best throughput. Policing only suits expedited-class UDP traffic such as voice. Mostly-TCP traffic needs shaping, so older equipment that can't shape may need replacing.
  • Allow for layer 2 overhead on layer 3 devices - Routers and firewalls should shape to 98% of the layer 2 rate. For example, a 20Mbps service becomes 20 x 0.98 = 19.6Mbps.
  • Use the burst sizes below - Set the committed burst (EBS) to match your service's class of service.
  • MTU - The values below assume a 1596-byte EVC MTU.

Standard class of service

ServiceLayer 2 rateLayer 3 rateBurst (EBS)Burst (bits)
100Mbps100Mbps98Mbps175 kB1,400,000
250Mbps250Mbps245Mbps175 kB1,400,000
500Mbps500Mbps490Mbps850 kB6,800,000
1000Mbps1000Mbps980Mbps1,030 kB8,240,000

Premium class of service

ServiceLayer 2 rateLayer 3 rateBurst (EBS)Burst (bits)
100Mbps100Mbps98Mbps125 kB1,000,000
250Mbps250Mbps245Mbps125 kB1,000,000
500Mbps500Mbps490Mbps625 kB5,000,000
1000Mbps1000Mbps980Mbps1,030 kB8,240,000

On a faster service? Ask your account manager for the right values.

Need a hand?

We can't configure individual routers or firewalls, as every device is different. Your IT provider or managed service provider can apply these settings. If they have questions about your service's profile, contact us and we'll help.

Related Articles

Was this article helpful?

Your feedback helps us improve our support content.