---
title: "Setting up traffic shaping for Enterprise Fibre"
description: "How to shape traffic on your router or firewall to match your Enterprise Fibre bandwidth profile, with recommended rates and burst sizes."
url: "https://www.lightningip.com.au/help/internet/enterprise-fibre-traffic-shaping"
canonical: "https://www.lightningip.com.au/help/internet/enterprise-fibre-traffic-shaping"
updated: "2026-11-19"
---

# Setting up traffic shaping for Enterprise Fibre

How to shape traffic on your router or firewall to match your Enterprise Fibre bandwidth profile, with recommended rates and burst sizes.

To get the best performance from Enterprise Fibre, set your router or firewall to shape outgoing traffic to the speed you've purchased. This applies to any layer 2 or layer 3 device plugged directly into the network termination device (NTD or NTU).

The network termination device enforces your service's bandwidth profile. If your equipment sends traffic faster than that profile, the extra traffic is dropped, which causes retransmissions and slower real-world speeds. Matching it avoids this.

## Key points

- **Shape, don't police** - Egress shaping at both ends gives the best throughput. Policing only suits expedited-class UDP traffic such as voice. Mostly-TCP traffic needs shaping, so older equipment that can't shape may need replacing.
- **Allow for layer 2 overhead on layer 3 devices** - Routers and firewalls should shape to 98% of the layer 2 rate. For example, a 20Mbps service becomes 20 x 0.98 = 19.6Mbps.
- **Use the burst sizes below** - Set the committed burst (EBS) to match your service's class of service.
- **MTU** - The values below assume a 1596-byte EVC MTU.

## Standard class of service

| Service | Layer 2 rate | Layer 3 rate | Burst (EBS) | Burst (bits) |
|---|---|---|---|---|
| 100Mbps | 100Mbps | 98Mbps | 175 kB | 1,400,000 |
| 250Mbps | 250Mbps | 245Mbps | 175 kB | 1,400,000 |
| 500Mbps | 500Mbps | 490Mbps | 850 kB | 6,800,000 |
| 1000Mbps | 1000Mbps | 980Mbps | 1,030 kB | 8,240,000 |

## Premium class of service

| Service | Layer 2 rate | Layer 3 rate | Burst (EBS) | Burst (bits) |
|---|---|---|---|---|
| 100Mbps | 100Mbps | 98Mbps | 125 kB | 1,000,000 |
| 250Mbps | 250Mbps | 245Mbps | 125 kB | 1,000,000 |
| 500Mbps | 500Mbps | 490Mbps | 625 kB | 5,000,000 |
| 1000Mbps | 1000Mbps | 980Mbps | 1,030 kB | 8,240,000 |

On a faster service? Ask your account manager for the right values.

## Need a hand?

We can't configure individual routers or firewalls, as every device is different. Your IT provider or managed service provider can apply these settings. If they have questions about your service's profile, contact us and we'll help.

## Related help

- [Troubleshooting your Enterprise Fibre connection](/help/internet/enterprise-fibre-troubleshooting)
