Skip to main content

Category: Business nbn & Static IP · Last updated 19 Nov 2026

Troubleshooting your Enterprise Fibre connection

Checks to run when your Enterprise Fibre service is down or unstable, including how to test directly from the network termination device.

If your Enterprise Fibre connection is down or unstable, a few quick checks will tell us whether the problem is on the fibre service or inside your network. That helps us get the right people on it faster.

Enterprise Fibre is delivered over nbn Enterprise Ethernet or Telstra Wholesale Ethernet Access. Either way, there's a carrier-managed network termination device (NTD, sometimes called an NTU or BNTD) at your site, and your router or firewall plugs into it.

1. Check the network termination device

  • Make sure it has power, and that the power cable and any power supply modules are firmly plugged in.
  • Look at the status lights. Note the state of the Sys, Power, PS1, PS2 and port lights (green, amber or off).
  • Take a clear photo of the lights. We'll ask for it if we need to raise a fault.

Don't unplug, move or reset the network termination device unless we ask you to. It's managed by the carrier, and changing it can slow down a fault repair.

2. Check your own equipment

  • Restart your router or firewall, and check the cable between it and the network termination device.
  • If you have an IT provider, ask them whether anything has changed on your network recently.

3. Test straight from the network termination device

This shows whether the service itself is working, without your router or firewall in the way.

  1. Plug in a computer Connect a laptop to the customer port on the network termination device that your router normally uses, with an ethernet cable.
  2. Set a static IP address In the laptop's network settings, enter the details below.
  3. Test the connection Open a few websites, or run a ping to a public address.
SettingValue
IP addressThe IP address we gave you for your service
GatewayThe gateway we gave you for your service
Subnet maskAsk your account manager
DNS1.1.1.1

Can't find your IP details? Your account manager can send them to you.

What the result means

  • The laptop gets online - The fibre service is working. The problem is likely in your router, firewall or network. Your IT provider is the best person to look at it next.
  • The laptop can't get online - Contact us on 1300 994 884. Tell us what you've checked and send the photo of the lights, and we'll raise the fault with the carrier.

Enterprise Fibre faults go through the carrier's enterprise fault process, which is generally faster than a standard nbn service.

Related Articles

Was this article helpful?

Your feedback helps us improve our support content.