Skip to main content

Category: Phone System Admin · Last updated 5 Nov 2026

How to use a function key template

Set up one list of keys and apply it to several staff members' phones at once.

If several of your team need the same keys on their phones, such as a BLF key for everyone in the office, a function key template saves you setting each phone up by hand. You build the list of keys once, then apply it to each staff member.

Before you start

  • You need an administrator login for the Hosted Voice portal. If you don't have one, contact us and we'll set it up for you.
  • Applying a template replaces every key on that phone. Any key that isn't in the template is cleared, including keys set up just for that person.
  • A template is a starting point, not a live link. Changing a template later doesn't change phones it was already applied to.

Got someone with their own keys? Reception phones with an expansion module, or anyone with extra keys, will lose them if you apply a template. Change their keys one at a time instead. See How to change the keys on a staff member's phone.

Create a template

1. Open Function Keys Template

In the portal, go to Extension and Trunk > Extension, then click Function Keys Template.

The Function Keys Template button above the extension list

2. Name the template

Click Add. Give the template a Name you'll recognise, like Reception, and a Remark if you'd like one.

The Add Template window with the name and remark filled in

3. Set up the keys and save

For each key, choose the Type (such as BLF), the Value (the colleague's extension) and a short Label. Click Add for more keys, then Save.

Four BLF keys set up in the template

The new template in the template list

Apply the template to a staff member

4. Open their Function Keys tab

Click the edit pencil next to the staff member, open the Function Keys tab and click Apply Function Keys Template.

The Apply Function Keys Template button on the Function Keys tab

5. Choose the template

Select your template and click Apply.

The Reception template selected

6. Check the keys and save

The phone's keys are replaced with the template's. Check the list, then click Save. The phone updates by itself.

The keys after applying the template, with an extra key cleared

Apply it to several people at once

  1. In Extension and Trunk > Extension, tick each staff member, then click Edit.

Two staff members ticked in the extension list

  1. Open the Function Keys tab and tick Bulk Edit.
  2. Click Apply Function Keys Template, choose the template, click Apply, then Save.

Bulk Edit ticked with the Apply Function Keys Template button

Bulk Edit replaces all the keys on every phone you've ticked, even if you only change one key. Only tick people who should end up with exactly the same keys.

Changing a template later

Editing a template doesn't update the phones it's already on. To roll out a change, apply the template to each phone again. That replaces their keys again, so leave out anyone who has their own keys.

Troubleshooting

  • Someone lost a key after I applied a template. Applying a template replaces every key. Add their extra key again on their Function Keys tab.
  • I changed the template but the phones didn't change. Apply the template to them again.
  • The phone still shows the old keys. Go to Auto Provisioning > Phones, tick the phone and click Reprovision.

Rather we did it? Contact us with the keys you'd like and who should have them, and we'll set it up for you.

Related Articles

Was this article helpful?

Your feedback helps us improve our support content.