Skip to main content

Category: Phone System Admin · Last updated 5 Nov 2026

How to change the keys on a staff member's phone

Add, change or remove the keys on one staff member's desk phone, like a BLF key for a colleague.

The keys down the side of a desk phone can show when a colleague is busy (a BLF key), dial a number, park a call and more. If you have an administrator login, you can add, change or remove a staff member's keys yourself in a couple of minutes.

Before you start

  • You need an administrator login for the Hosted Voice portal. If you don't have one, contact us and we'll make the change for you.
  • Make changes in the portal, not on the phone. Keys changed on the handset itself get replaced the next time the phone updates.
  • If the phone uses a template, applying the template again later replaces every key, including the ones you change here. See How to use a function key template.

Change a staff member's keys

1. Edit the staff member's extension

In the portal, go to Extension and Trunk > Extension. Click the edit pencil next to the staff member whose phone you're changing.

The extension list with one staff member's row highlighted

2. Open the Function Keys tab

Each row is one key on their phone, starting from Key 1 at the top of the phone.

The Function Keys tab highlighted on the edit page

3. Add a key

Click Add. A new key appears at the bottom of the list. To change an existing key, skip this step and edit that row instead.

A new Key 5 row added at the bottom of the list

4. Choose the Type

Set the Type. The most common is BLF, which lights up when that colleague is on a call and lets you transfer to them with one press.

The Type list open with BLF highlighted

5. Choose the Value

For a BLF key, choose the colleague's extension from the Value list.

The Value list with a colleague's extension highlighted

6. Add a Label and save

Type a short Label. This is the name shown next to the key on the phone. When you're done, click Save.

The new key with BLF, the colleague's extension and a label filled in

To do thisDo this
Remove a keyClick the bin icon on its row, then Save.
Move a keyDrag the arrows in the Sort column, then Save.
Blank a key on purposeSet its Type to N/A.

Check the phone has updated

The phone picks up the change by itself, usually within a few minutes. If someone's on a call, their phone updates as soon as the call ends.

If it still hasn't changed:

  1. Go to Auto Provisioning > Phones.
  2. Tick the phone, then click Reprovision.

A phone ticked in the Phones list

  1. Click OK.

The message asking to confirm reprovisioning the phone

Troubleshooting

  • The key shows the wrong name. Change the Label and save. If the colleague's name changed, reprovision the phone to refresh it.
  • A key I set on the phone has gone. Changes made on the handset get replaced when the phone updates. Set the key here instead.
  • I don't see Extension and Trunk in the menu. Your login doesn't have administrator access. Contact us and we'll make the change.

Rather we did it? Contact us with the staff member's name and the keys you'd like, and we'll set them up for you.

Related Articles

Was this article helpful?

Your feedback helps us improve our support content.