Skip to main content

Category: Technologies · Last updated 19 Nov 2026

What is a bridge tap?

What a bridge tap is, how it can slow down an FTTN or FTTB nbn connection, and who fixes it.

A bridge tap is an extra length of phone wiring inside a building that branches off the main line but doesn't go anywhere useful. It's common in older homes and offices, where old phone sockets and wiring were left in place.

It only affects copper-based nbn connections, mainly FTTN and FTTB.

How it affects your internet

FTTN and FTTB use high-frequency signals over your phone wiring. A bridge tap can interfere with those signals, which can cause:

  • Slower speeds - the signal weakens before it reaches your modem.
  • Dropouts - parts of the signal bounce back along the wire and cause errors.
  • An unstable connection - your modem may struggle to hold a steady speed.

How buildings are wired

Older buildings are usually wired in one of two ways:

  • Star - each phone socket has its own cable running back to one central point near where the line enters the building.
  • Daisy chain - one cable runs from socket to socket around the building.

Unused sockets and leftover cable in either layout can create a bridge tap.

Who fixes it

A bridge tap is part of the wiring inside your building, not the nbn network. That means the property owner needs to arrange for a licensed cabler to fix it. Only a licensed cabler should change phone wiring.

Lightning IP doesn't do cabling work, but if our line tests show signs of a bridge tap, we'll let you know and can point you towards a licensed cabler.

Before calling a cabler, try plugging your modem into the first phone socket in the building, with no extension cables, double adaptors or filters. If your connection improves, that's a good sign the wiring is the problem.

Related Articles

Was this article helpful?

Your feedback helps us improve our support content.