---
title: "Setting up your TP-Link Archer router"
description: "How to set up a TP-Link Archer Wi-Fi router (such as the AX55, AX73, C6 or C7) on your nbn connection."
url: "https://www.lightningip.com.au/help/internet/setup-tp-link-archer-router"
canonical: "https://www.lightningip.com.au/help/internet/setup-tp-link-archer-router"
updated: "2026-11-16"
---

# Setting up your TP-Link Archer router

How to set up a TP-Link Archer Wi-Fi router (such as the AX55, AX73, C6 or C7) on your nbn connection.

TP-Link Archer Wi-Fi routers, such as the Archer AX55, AX73, AX10, C6 and C7, share very similar setup screens. This guide covers Archer models without a phone socket port. If your Archer model name starts with **VR** or **VX**, it has a built-in modem, so see our Archer VR-series or VX-series guides instead.

Archer routers don't have a VDSL modem built in. On **FTTP, HFC, FTTC and Fixed Wireless** they plug straight into your nbn equipment. On **FTTN or FTTB** you'll also need a VDSL modem set to bridge mode, with the Archer plugged into it. See our modem and router setup guides for how to set up bridge mode on your modem.

## Before you start

| Setting | What to choose |
|---|---|
| Connection type | Dynamic IP |
| VLAN (IPTV/VLAN) | Off |
| Username and password | Not needed |

## Setting up your Archer router

1. **Connect to your nbn equipment** - Run an ethernet cable from the router's **WAN** or **Internet** port (usually a different colour to the others) to your nbn equipment: port **UNI-D1** on an FTTP or Fixed Wireless Connection Box, the ethernet port on an HFC Connection Box, or the port labelled **Gateway** on an FTTC Connection Device. On FTTN or FTTB, plug it into a LAN port on your bridged VDSL modem instead.
2. **Power on and connect a device** - Switch the router on and join its Wi-Fi using the details on the label, or plug a computer into a LAN port.
3. **Open the setup page** - In a web browser, go to **http://tplinkwifi.net** or **192.168.0.1**, and create an admin password. You can also use the **TP-Link Tether** app.
4. **Run Quick Setup** - Choose your time zone, then set the connection type to **Dynamic IP** (or use **Auto Detect**).
5. **Skip the MAC address step** - If asked, choose **Do NOT clone MAC address**.
6. **Set up Wi-Fi** - Choose your Wi-Fi name and password, then save. Wait a few minutes for the connection to come up.

## Checking the VLAN setting

If your router was set up by another provider, a VLAN may be turned on, which will stop it connecting to our network.

1. **Open the VLAN settings** - Log in and go to **Advanced** > **Network** > **IPTV/VLAN**.
2. **Turn it off** - Untick **IPTV/VLAN** (or turn the switch off) and click **Save**.
3. **Check the internet settings** - Go to **Advanced** > **Network** > **Internet** and make sure the connection type is **Dynamic IP**. PPPoE also works on our network with any username and password.

## If it doesn't connect

- **Internet light off or orange** - Check the cable is in the router's WAN port and the correct port on your nbn equipment, then power-cycle the nbn equipment and the router.
- **On FTTN or FTTB** - Make sure your VDSL modem is in bridge mode and its DSL light is solid.
- **Still no luck** - Follow our no internet connection troubleshooting guide, or get in touch.
