---
title: "Setting up your TP-Link Aginet mesh Wi-Fi (HX510, HX716 Pro or HB210 Pro)"
description: "How to set up a TP-Link Aginet mesh Wi-Fi system (HX510, HX716 Pro or HB210 Pro) on your nbn connection, including pairing it with a VX230v or VX420-G2h on FTTN/FTTB."
url: "https://www.lightningip.com.au/help/internet/setup-tp-link-aginet-mesh"
canonical: "https://www.lightningip.com.au/help/internet/setup-tp-link-aginet-mesh"
updated: "2026-11-16"
---

# Setting up your TP-Link Aginet mesh Wi-Fi (HX510, HX716 Pro or HB210 Pro)

How to set up a TP-Link Aginet mesh Wi-Fi system (HX510, HX716 Pro or HB210 Pro) on your nbn connection, including pairing it with a VX230v or VX420-G2h on FTTN/FTTB.

TP-Link's Aginet mesh Wi-Fi systems, including the HX510, HX716 Pro and HB210 Pro, are all set up the same way through the TP-Link Aginet app.

**Bought your Aginet mesh from Lightning IP?** It arrives pre-configured for your service. Just connect the main unit to your nbn equipment and switch it on. You don't need to follow the setup steps below.

## Which setup do you need?

These Aginet mesh units don't have a VDSL modem built in, so how you set them up depends on your nbn technology:

- **FTTP, HFC, FTTC or Fixed Wireless** - The main mesh unit plugs straight into your nbn equipment. Follow **Setting up your Aginet mesh** below.
- **FTTN or FTTB** - Pair your mesh units with a **TP-Link VX230v** or **VX420-G2h** modem router. The modem connects to your phone socket, and the mesh units extend its Wi-Fi around your home as one network. Follow **Using Aginet mesh on FTTN or FTTB** below.

## Before you start

| Setting | What to choose |
|---|---|
| Connection type | Dynamic IP (sometimes called IPoE or DHCP) |
| VLAN | Off |
| Username and password | Not needed |

You'll also need the **TP-Link Aginet** app on your phone (App Store or Google Play).

If your Aginet mesh came from another provider, factory reset it before you start. Hold the **Reset** button on the back for about 10 seconds until the light changes, then wait two minutes for it to restart. This clears any settings your previous provider added.

## Setting up your Aginet mesh

Use these steps on FTTP, HFC, FTTC or Fixed Wireless.

1. **Connect the main unit** - Run an ethernet cable from the **WAN/LAN** port on your main unit to your nbn equipment: port **UNI-D1** on an FTTP or Fixed Wireless Connection Box, the ethernet port on an HFC Connection Box, or the port labelled **Gateway** on an FTTC Connection Device.
2. **Power it on** - Plug the unit into power and wait about two minutes, until the light flashes blue.
3. **Open the Aginet app** - Log in with your TP-Link ID, or tap **Continue without TP-Link ID**. On iPhone, allow the app to access your local network when asked.
4. **Connect to the mesh** - Join your phone to the Wi-Fi network printed on the label under the unit. The app will find the device; tap **Set up device**.
5. **Set a device password** - Create a password for managing the mesh. Keep it somewhere safe.
6. **Choose the internet settings** - When asked how you connect, choose **Dynamic IP** (it's often detected automatically) and leave VLAN turned off.
7. **Name your network** - Choose a Wi-Fi name and password, and leave band steering on.
8. **Add more units** - If you have a multi-pack, tap **+** in the app to add each extra unit. Place them within one or two rooms of each other, or connect them with ethernet for the best performance.

## Using Aginet mesh on FTTN or FTTB

On FTTN or FTTB, your **TP-Link VX230v** or **VX420-G2h** is the main device. It connects to your phone socket and runs your network, and your HX510, HX716 Pro or HB210 Pro units join it as mesh points.

1. **Set up your modem first** - Make sure your **VX230v** or **VX420-G2h** is connected and online. If you need help, see our setup guide for your modem.
2. **Open the Aginet app** - Join your phone to your modem's Wi-Fi, open the **Aginet** app and log in. The app will find your modem; if it's the first time, set a device password.
3. **Add a mesh unit** - Tap **+** and choose to add a mesh device, then select your model (**HX510**, **HX716 Pro** or **HB210 Pro**).
4. **Power on the mesh unit** - Place the mesh unit near the modem for setup, plug it into power and wait until the light flashes blue. Follow the prompts in the app to pair it.
5. **Move it into place** - Once paired, move the mesh unit to where you need better coverage, ideally within one or two rooms of the modem. Its light should turn solid when it has a good connection.
6. **Add any extra units** - Repeat for each extra mesh unit.

For the fastest, most reliable connection between units, you can run an ethernet cable from a LAN port on the modem to the **WAN/LAN** port on a mesh unit. Don't set the modem to bridge mode for this setup, because it needs to stay in charge of your network.

## Setting up with a web browser instead

If you'd rather not use the app on FTTP, HFC, FTTC or Fixed Wireless, connect a computer to the main unit's Wi-Fi or a LAN port and go to **http://tplinkwifi.net**. Create a login password, then set the internet connection type to **Dynamic IP** with VLAN turned off.

## If it doesn't connect

- **Light stays red or the app can't find the internet** - Check the cable is in the **WAN/LAN** port and the correct port on your nbn equipment, then power-cycle the nbn equipment and the mesh.
- **Mesh unit won't pair on FTTN or FTTB** - Move it closer to the modem, make sure the modem is online, and try adding it again in the Aginet app.
- **Still no luck** - The Aginet app has built-in troubleshooting. You can also follow our no internet connection troubleshooting guide, or get in touch.
