---
title: "Setting up your Google Nest Wifi or Google Wifi"
description: "How to set up Google Nest Wifi Pro, Nest Wifi or Google Wifi on your nbn connection."
url: "https://www.lightningip.com.au/help/internet/setup-google-nest-wifi"
canonical: "https://www.lightningip.com.au/help/internet/setup-google-nest-wifi"
updated: "2026-11-16"
---

# Setting up your Google Nest Wifi or Google Wifi

How to set up Google Nest Wifi Pro, Nest Wifi or Google Wifi on your nbn connection.

Google Nest Wifi Pro, Nest Wifi and the original Google Wifi are all set up through the Google Home app.

Google's Wi-Fi systems are routers, not modems, so they don't have a VDSL modem built in. On **FTTP, HFC, FTTC and Fixed Wireless** they plug straight into your nbn equipment. On **FTTN or FTTB** you'll also need a VDSL modem set to bridge mode, with the Google router plugged into it. See our modem and router setup guides for how to set up bridge mode on your modem.

## Before you start

| Setting | What to choose |
|---|---|
| Connection type | DHCP (automatic). This is Google's default |
| VLAN | Not needed. Google Wifi doesn't support VLAN tagging, and our network doesn't use one |
| Username and password | Not needed |

You'll also need the **Google Home app** on your phone and a Google account.

## Setting up your Google Wifi

1. **Connect your main router** - Run an ethernet cable from the **WAN** port on your main Google router to your nbn equipment: port **UNI-D1** on an FTTP or Fixed Wireless Connection Box, the ethernet port on an HFC Connection Box, or the port labelled **Gateway** on an FTTC Connection Device. On FTTN or FTTB, plug it into a LAN port on your bridged VDSL modem instead. On Google Wifi and Nest Wifi, the WAN port is marked with a globe icon.
2. **Power it on** - Plug the router into power and wait for the light to pulse.
3. **Open the Google Home app** - Tap **+** > **Set up device** > **New device** and follow the prompts.
4. **Connect to the internet** - The app checks your connection automatically. Our network works with Google's default settings, so there's nothing to enter.
5. **Name your network** - Choose a Wi-Fi name and password.
6. **Add extra points** - If you have more than one unit, the app will guide you through adding each one.

## Checking the connection settings

If your Google router was set up for PPPoE or a static IP previously, change it back to automatic.

1. **Open Wi-Fi settings** - In the Google Home app, tap **Favourites** or **Devices**, then **Wi-Fi** > **Network settings** > **Advanced networking**.
2. **Open WAN settings** - Tap **WAN**.
3. **Choose DHCP** - Select **DHCP** and save. PPPoE also works on our network with any username and password.

## If it doesn't connect

- **Light is orange or pulsing** - Check the cable is in the WAN port and the correct port on your nbn equipment, then power-cycle the nbn equipment and the router.
- **On FTTN or FTTB** - Make sure your VDSL modem is in bridge mode and its DSL light is solid.
- **Still no luck** - Follow our no internet connection troubleshooting guide, or get in touch.
