Skip to main content

Category: Connection Setup · Last updated 16 Nov 2026

Setting up your modem/router for the first time

A basic walkthrough for getting your new modem online.

Setting up a new modem is usually quick, especially if it's supplied by Lightning IP, since it arrives pre-configured for your service.

  1. Connect to your nbn equipment For FTTP, HFC and Fixed Wireless, connect an ethernet cable from your modem's WAN port to the port on your nbn Connection Box (on FTTP, usually labelled UNI-D1). For FTTC, connect to the port labelled Gateway on your nbn Connection Device. For FTTN and FTTB, connect the phone cable from your modem to the wall phone socket.
  2. Connect to power Plug the modem into a power outlet and switch it on.
  3. Wait for it to connect Allow five to ten minutes. The indicator lights will change as it connects.
  4. Connect your devices Join the Wi-Fi network using the name and password printed on the modem, or plug a device in with an ethernet cable.

Using your own modem

Our network accepts both IPoE and PPPoE connections without a VLAN tag. If your modem has a VLAN ID set from a previous provider, turn that setting off. See our guide on keeping your existing modem for details.

If the lights don't settle into a stable pattern after 10 minutes, see our step-by-step troubleshooting guide for no internet connection.

Related Articles

Was this article helpful?

Your feedback helps us improve our support content.