Category: Connection Setup · Last updated 16 Nov 2026
How to activate your Lightning IP nbn service
What you need to do on the day your service goes live.
What you need to do on your connection date depends on whether your connection needs a technician or is activated remotely.
Remote activation
Most connections where nbn equipment is already installed, including FTTN and FTTB, are activated remotely. Connect your modem and power it on on your connection date. Your service is often live within a few hours, and sometimes within 30 minutes.
Technician-assisted activation
The technician installs your nbn equipment and confirms the connection is working before they leave. Once they're done, connect your modem to the nbn Connection Box and power it on.
Using your own modem
Make sure your modem is set up for IPoE or PPPoE with no VLAN tag. If you ordered a modem from us, it arrives pre-configured.
If your modem shows no internet connection several hours after your activation, restart it and check our step-by-step troubleshooting guide. If it's still not working by the end of the day, contact us.
Related Articles
- Connection SetupHow to order a new nbn internet plan with Lightning IPA step-by-step guide to ordering a new nbn plan with Lightning IP, from checking your address to choosing a plan and what happens next.
- Connection SetupWhat happens after you place your nbn order?What to expect between placing your order and going live.
- Connection SetupDo I need a technician appointment to connect nbn?When an nbn technician visit is required, and when it isn't.
- Connection SetupWhat to expect during an nbn technician installationWhat happens when the nbn technician arrives, how long the visit usually takes, where the equipment goes and what you'll need to have ready.
Was this article helpful?
Your feedback helps us improve our support content.