Category: Technologies · Last updated 16 Nov 2026
HFC nbn and scheduled network events: what to expect
Why HFC customers occasionally see temporary changes to their service.
nbn Co periodically carries out scheduled work on the HFC network to add capacity, connect new customers in an area, or carry out maintenance. This is usually planned outside busy hours, but can occasionally cause a brief drop in speed or a short disconnection.
How you'll know
We pass on any advance notice we receive from nbn Co about planned work affecting your address, and known events are listed on our network status page.
If your connection drops
Most HFC events are short, and your connection comes back on its own. If it doesn't return after the work window, restart your nbn Connection Box and modem - turn them off at the wall, wait 30 seconds, turn the nbn Connection Box on first, then your modem.
If your HFC connection is slower or drops out with no other explanation, check our network status page before troubleshooting your own equipment.
Related Articles
- TechnologiesWhat is nbn and how does it work?A plain-English explanation of Australia's national broadband network, how it reaches your home, and why your choice of provider still matters.
- TechnologiesFibre to the Premises (FTTP): what it is and what to expectHow Fibre to the Premises (FTTP) nbn works, why it's the fastest nbn technology type available and what equipment is installed at your home.
- TechnologiesFibre to the Node (FTTN): what it is and what to expectHow FTTN works, why your copper line and in-home wiring matter, and how to choose a speed tier.
- TechnologiesFibre to the Curb (FTTC): what it is and what to expectHow Fibre to the Curb (FTTC) nbn differs from FTTN, what the small device outside your home does and what speeds and setup to expect.
Was this article helpful?
Your feedback helps us improve our support content.