---
title: "How to factory reset a Yealink desk phone"
description: "Reset a Yealink desk phone to factory settings so it reconnects to your phone system, and what to do if it asks for a PIN afterwards."
url: "https://www.lightningip.com.au/help/hosted-voice/factory-reset-yealink-handset"
canonical: "https://www.lightningip.com.au/help/hosted-voice/factory-reset-yealink-handset"
updated: "2026-11-19"
---

# How to factory reset a Yealink desk phone

Reset a Yealink desk phone to factory settings so it reconnects to your phone system, and what to do if it asks for a PIN afterwards.

A factory reset wipes a Yealink desk phone back to how it left the factory. When it starts up again, it fetches its settings from your phone system and reconnects by itself. It's a good fix for a phone that's stuck, or one that's moving to a new staff member.

**Call us before you reset.** Some older Yealink phones ask for a PIN after a reset before they'll reconnect. Ring us on **1300 994 884** first, and we'll make sure it comes back online smoothly.

## Before you start

- A reset removes anything saved only on the phone itself, such as personal contacts, ringtones and backgrounds. Keys and settings from your phone system come back automatically.
- Make sure the phone is still plugged into the network, so it can reconnect after the reset.
- If the phone just needs a restart, unplug the power cable (or the network cable, if that also powers the phone), wait 10 seconds and plug it back in. That's often all it needs.

## Reset the phone

1. **Hold the OK key** - Press and hold the **OK** key in the middle of the arrow keys for about 10 seconds. On some models, hold the **Redial** key instead.
2. **Confirm the reset** - When the screen asks **Reset to factory setting?**, press **OK** (or tap **OK** on a touchscreen).
3. **Wait for it to restart** - The phone restarts by itself. It can take a few minutes and may restart more than once.

## Check it worked

The phone shows the staff member's name or extension on the screen, and you can make a test call.

## If it doesn't reconnect

- **It asks for an RPS PIN or says to contact your service provider** - Call us with the MAC address from the label under the phone. Each phone has its own PIN, and we'll give it to you.
- **It shows "No service" or "Configuration updating"** - Give it a couple of minutes. It may restart again on its own.
- **It asks for a username and password** - Don't enter anything. Contact us with the site and the MAC address from the label, and we'll get it connected.

Rather we did it? Contact us with the phone's MAC address and we'll walk you through it.
