---
title: "How to put keys on an expansion module"
description: "Set up the extra keys on a phone's expansion module, the side panel of keys used on reception phones."
url: "https://www.lightningip.com.au/help/hosted-voice/expansion-module-keys"
canonical: "https://www.lightningip.com.au/help/hosted-voice/expansion-module-keys"
updated: "2026-11-16"
---

# How to put keys on an expansion module

Set up the extra keys on a phone's expansion module, the side panel of keys used on reception phones.

An expansion module is the panel of extra keys that sits beside a desk phone, often used at reception to see the whole office at a glance. Its keys are set up in the same place as the phone's own keys, they just carry on after the phone's last key.

<video controls preload="metadata" src="https://cms.lightningip.com.au/assets/698c140d-5bb9-4fd7-a556-801b6efb789d" aria-label="1-minute video: how to put keys on an expansion module"></video>

## Before you start

- **You need an administrator login** for the Hosted Voice portal. If you don't have one, contact us and we'll set it up for you.
- **Know your phone model.** It decides which key number the module starts at. Check the table below.
- **Don't apply a template to this phone** unless the template includes the module keys. Applying a template replaces every key, including the module's. See [How to use a function key template](/help/hosted-voice/function-key-templates).

## Where the module's keys start

Keys are numbered in order. The phone's own keys come first, then the module's keys carry straight on.

| Phone | Keys on the phone | Pages on the phone | First key on the module |
|---|---|---|---|
| Yealink T57W | 29 | TBC | Key 30 |
| Yealink T54W | TBC | 3 | TBC |

| Module | Keys | Pages | Keys per page |
|---|---|---|---|
| Yealink EXP50 | 60 | 3 | 20 |

A second module carries on after the first: with an EXP50 on a T57W, the second module starts at Key 90.

## Add a key to the module

### 1. Open the staff member's Function Keys tab

In the portal, go to **Extension and Trunk > Extension**, click the edit pencil next to the staff member, and open the **Function Keys** tab.

### 2. Add keys until you reach the module

Click **Add** until you reach the key number you need. Leave the keys in between as **Null**.

![Keys 26 to 29 left as Null, with Key 30 below](https://cms.lightningip.com.au/assets/9bf6c743-1d9d-4550-b146-fb698756ae36)

| Type | What it does |
|---|---|
| **Null** | Leaves that key as it is. Use this to skip over keys. |
| **N/A** | Makes the key blank. |

### 3. Set up the module key and save

On the module key, set the **Type** (such as **BLF**), the **Value** and a **Label**, then click **Save**.

![Key 30 set up as a BLF key, the first key on the module](https://cms.lightningip.com.au/assets/a09edc9d-2b9f-45db-ba36-01f565a2b042)

The phone and module update by themselves. If they haven't after a few minutes, go to **Auto Provisioning > Phones**, tick the phone and click **Reprovision**.

## Troubleshooting

- **The key showed up on the phone, not the module.** The key number is too low. Count the phone's keys and check the table above.
- **Some phone keys went blank.** Those keys were set to N/A. Set them back to Null, or set them up again.
- **The module is dark or shows no keys.** Check the module's cable and power. If it still doesn't work, contact us with the site and the phone's MAC address.

Rather we did it? Contact us with the staff member's name and the keys you'd like on the module, and we'll set them up.
